Jo Sonja’s Gloss Varnish Water-BasedJo Sonja’s Polyurethane Water Based Gloss Varnish is a durable formulation for indoor and outdoor use.Jo Sonja’s Polyurethane Varnishes dry clear and are non-yellowing. It is water based and can be cleaned up with water. Apply with a broad flat brush or a sponge roller. Do not use over oil-based paints or oil-based antiquing finishes. Do not add water. For use on hard surfaces such as wood and board. Not suitable for use on paper, canvas or other flexible surfaces.Use varnish at full strength, if thinning is necessary, add drops of Flow Medium or Retarder. Do not over dilute.Apply thin layers in a criss-cross motion using a soft but firm brush suitable to surface size.Smooth coat by brushing final strokes in the direction of the wood grain.Allow to air dry a minumum of an hour before applying additional coats. Drying time depends on climate and humidity.Apply 3 coats before sanding. Sand lightly if 24 hours lapse between coats to ensure adhesion.For alcohol resistant finish, apply a minimum of 4 coats to varnish. Allow varnished item to cure 2 weeks before use.Not recommended for use over any oil based products.A hair dryer may be used to speed surface drying. Avoid excessive heat which could cause crazing.Clean up with mild soap and cool water.Approximate coverage 1ml = 251cm2
