Topdiag P100 12V 24V Automotive Circuit Tester Probe Kit Car Voltage Overload Short Circuit Resistant Tester Diagnostic Tool

Description:P100 New Generation Automotive Electrical Circuit System Tester for Cars and Trucks 0V – 70V. This general-purpose tool is the best electrical tester, reducing diagnostic time in all 6-30V vehicle electrical systems. Simply connect the tool to the vehicle’s battery, and it can:1. Determine at a glance whether a circuit is positive, negative, or open without having to reconnect the clips from one battery terminal to another.2. Test continuity using the built-in auxiliary ground cable.3. Apply positive or negative battery current to the probe tip using the tester’s own switch to test the function of an electrical component without the use of jumper wires.4. Instantly test for poor ground connections with this circuit tester without performing voltage drop tests. The tool also features a short circuit function. The internal circuit will break if overloaded.Specifications:Brand: TopdiagModel: P100Item Name: Automotive Circuit Tester Cable Length: 2mDisplay: TFT color display (160 x 128 dpi)Operating temperature: 0 to 60 °C (32 to 140 °F)Storage temperature: -40 to 70 °C (-40 to 185 °F)External power supply: 12.0 or 24.0 V power supply via vehicle batteryDimensions: Length 165 mm * Width 40 mm * Height 27 mmTest standard:100% power: no trip.150% power: trip in one hour.200% power: triggering in 3–30 seconds.300% power: triggering in 0.5–4.0 seconds .Specifications of the test tool:DC voltage range: 0–65 V 1 digit. Resistance range: 0–200 kΩ. The tone frequency response ranges from 0 Hz to 10 kHz. Circuit breaker rated current: 1–10 amps.About the P100 automotive circuit tester:Red/green polarity indicator (positive/negative and tests in different modes show red/green indicator lights). LCD HD color display (uses a color LCD screen; the screen is clearer and the data is more intuitive).Purpose of the P100 circuit probe kit:* Diagnose battery status * AC/DC voltage, resistance, diode test * Component activation * Short circuit detection * Broken wire location * Bad ground location * Trailer testing * Continuity check * 20-foot extension cord1. Voltage and polarity tests – Quickly determine DC/AC voltage and positive/negative. 2. Resistance continuity test – LCD screen displays resistance value. 3. AC circuit signal tests – Quickly troubleshoot sensor circuit problems. 4. Component activation in hand, in vehicle, or on the ground. 5. Trailer and connection testing. The 10-meter extension cable allows you to test cars or trucks. 6. Check for poor ground connections and locate short circuits. 1. Electrical tester probe tip – contains the circuit or component to be tested. 2. Light – illuminates dark work areas at night. 3. Red/green polarity indicator – identifies positive, negative, or open circuits. The red indicator light illuminates when the probe tip touches a positive circuit. The green indicator lights up when the probe tip touches a negative circuit. 4. LED display – shows test results. 5. The power switch allows you to apply positive or negative battery current to the tip to activate and test the function of electrical components. 6. Mode button – selects the operating mode: AC voltage, DC voltage, resistance, diode. 7. Speaker – a beep sounds when the audio is activated. 8. Auxiliary ground wire – supports testing as a ground wire. 9. Adapter – connects to the battery. There are four modes for diagnosing circuits, accessible by pressing the mode button and cycling through each one. DC voltage: Touch the probe tip to a circuit, and the LCD display will read the DC voltage with a resolution of 0.1 volts. AC voltage: Touch the probe tip to a circuit, and the LCD display will read the maximum voltage, minimum voltage, frequency, and duty cycle. Resistance: Touch the probe tip to a circuit, and the LCD display will read the resistance between the tip and the auxiliary ground wire. Sound on/off: Briefly press the mode button to turn the sound on or off while quickly pressing and releasing the mode button (a short press and release). A short high-pitched beep indicates that the sound is on. A short low-pitched beep indicates that the sound is off.Package included:1 x Automotive Circuit Tester